THOR 46

Coming soon

The THOR 46 desktop pneumatic thermo press is designed for sublimation printing. This model embodies the many years of experience of the company's engineers, based on numerous tests and the desire to make the design more convenient, reliable, easy and affordable. It is used for thermal transfer of images to various surfaces, ideal for thermo-fusing films on t-shirts, gluing and fixing direct printing.The THOR 46 desktop pneumatic thermo press is designed for sublimation printing. This model embodies the many years of experience of the company's engineers, based on numerous tests and the desire to make the design more convenient, reliable, easy and affordable. It is used for thermal transfer of images to various surfaces, ideal for thermo-fusing films on t-shirts, gluing and fixing direct printing.


Compact size and light weight make it easy to place a thermo press on a regular table that can be found in any production room, and also save on the cost of its delivery. The powerful pressing of the heating plate provides reliable pneumatics of the Italian company Camozzi, allowing you to work in a semi-automatic mode, saving energy and time. The plate is automatically lowered at the beginning of the working cycle, and will rise after its completion. THOR 46 Thermoplastic is designed for thermal transfer of images onto T-shirts and other small surfaces.


Uniform heating and pressing all over the surface of the printing area is ensured by an aluminum alloy heating plate. Heating elements cover most of its area. To compensate for heat losses in the corners and edges of the plate, these seats are reinforced with a triple heating circuit. The deviation of temperature is no more than 1 ° C over the entire surface of the plate. The electronic timer and the temperature controller quickly adjust to the desired operating mode.The worktable easily moves along the guides, and is also fixed in the print area and in the material laying area. An additional advantage is the low power consumption and the possibility of connection to a single-phase 220 V network. The THOR 46 wide-format thermal press can be connected to both the main pneumatic system and to a mobile compressor with a working pressure of at least 6-8 Atm. A similar design of the wide-format thermo press is available in a larger size: 90 x 70 cm. Read more about THOR 97

Specifications

Print area

40 х 60 cm

Sliding work table

40 х 60 cm (2 tables)

Operating temperature range

25 - 230 °С

Temperature deviation

no more than 1 °С

Guarantee

36 months

Timer setting

0 - 100 sec/min/hour

Voltage

220 V / 27 А / 1 phase

Liner

Porous rubber 40 x 60 x 1 cm

Power

2 kW

Pneumatic system

Camozzi

Automation system

Autonics

Aluminium plate

40 х 60 cm

Power cable

3 meters, 2х2.5 section

Compressor

optional

Dimensions (mm)

W 1250 / L 600 / H 1100

Weight

120 kg